What The Heck Is Equivalency? What Sensor Size Is All About!

Today we are taking a look at equivalency. Not equivalent exposure, equivalency.

What the heck is that?

Special thanks to LensProToGo for sponsoring this video/article:

Get 15% off your LensProToGo rental.
www.lensprotogo.com
Use Discount Code: SLANTEDLENS15

Equivalency is a very, very complicated subject matter, but one people have been screaming about because of the last format comparison we did.

Yes, we did format comparison a little while back. And everyone in the comments kept saying equivalency, you should have shot equivalent exposures, you’re laying different amounts of light in the camera, and I was just like, what are these people talking about?

So I did a deep dive and researched what equivalency is? And it’s actually extremely interesting. And we’re going to tell you all about it. So let’s take a look at equivalency next here on The Slanted Lens.

 

The first thing we need to talk about in order to understand this is crop factor. And most of us are familiar with what that is.

If you have a full frame sensor, crop factor works off from full frame. If you have an APS-C sensor, that’s going to be a crop factor of 1.5. So a 50mm lens on full frame, on an APS-C sensor it is going to be a 75mm, it’s going to be cropped in. You’re not going to see as much. Your field of view is not going to be as great on that APS-C sensor.

If you go the other direction with medium format it goes the other way. So your 50mm is going to be more like a 40mm or 35mm.

Generally, we shoot for field of view. So we’ll end up using different focal lengths on different cameras to achieve the same field of view because we want a certain frame size, or to see a certain distance, or we get kind of a wider angle or something like that. So all the cameras are going to have roughly the same field of view, but they’re using different focal lengths to achieve that.

The depth of field in your image is determined by one thing and that is the physical aperture of your lens, not the aperture number but the physical opening in the lens. That is going to be different on each one of these formats. The physical opening at f/2.8 is going to be different with every single one of these. It’s not going to give you the same depth of field, because that f/2.8 size is going to be a different opening size on each one of these lenses.

The way we calculate the diameter of that opening is actually by taking the focal length that you are shooting and dividing it by the F number. So really easy, if we are shooting 100mm lens and an f/2, then the physical aperture, the diameter will be 50mm across. If you are shooting a 50mm and f/2 the physical diameter will be 25mm across. If you are shooting an f/4 that physical diameter will be 12.5mm.

So we should start off by shooting each one of these lenses at f/2.8 and just see how different that depth of field is for each lens at f/2.8. So that gives us an idea of exactly where the depth of field builds on each of these cameras. You see it drastically.

This is a Micro Four Thirds. There’s some out of focus. It’s not all sharp by any means. But the depth of field is pretty deep.

Then you go to the crop sensor, the X-T4 for a little less depth of field, not a huge jump but a little less.

Then we go to the Sony and that’s like a big jump and then the medium format camera, not as much of a jump.

Now we’ve shot at the same aperture number on all the cameras. Let’s talk about equivalency. The idea of equivalency is basically that you are allowing the same amount of light into the camera body. No matter which lens or which format you’re using, we want the same amount of light. All of the physical diameters on the apertures are going to have to match which means doing a lot of math but it’s actually very simple. Basically, for every format size you go up, you stop down one so let’s start at f/2.8 on a Micro Four Thirds camera to get the same physical aperture on our crop sensor camera APS-C camera, we just go to an f/4 and then to get the same amount of light in our full frame camera we go to an f/5.6. And then on our medium format camera, we go to an f/8. But we have one problem here. You know what the problem is?

When you put a different aperture on every different camera you have a different exposure for every different camera. So you have to compensate that with shutter or ISO. Now we don’t want to do the shutter because again, this is equivalency. So it’s all about letting the same amount of light and if we start dragging the shutter for some of these cameras, and we’re just allowing more light in which means we’re back to where we started from with the ISO.

So in order to compensate for the smaller shutters on the larger sensor cameras, we’re going to step up the ISO. So that means if we started at 200 ISO on our Olympus, because that’s the lowest it can go, we’re going to have shoot aa 1600 ISO on our medium format camera because we’ve stopped down to an f/8.

 

Okay, so now we’re shooting with our equivalency settings. The Olympus will be the same settings as last time it’s shooting at ISO 200 that’s the lowest it can go and an F 2.8. The shutter speeds will be the same across all the cameras. So this image should look pretty familiar. And then we go to the Fuji XT-4 and it does look pretty similar focus wise. You look at the king in the back and our focus is holding about the same from the three to the five. Yeah, very similar and this is not a f/2.8 this is f/4. So the Fuji is at a f/4. And we have basically the same field so that means we have to go to f/5.6 on the next one and that is pretty similar. If I want to nitpick this, maybe there’s a slight difference in terms of focus between the Fuji and the Sony. The Sony might be a slightly shallower depth of field. This is now at f/8 so those all look very similar. F/8 on the medium format compared to the F/2.8 on the Olympus. There is the same amount of depth of field.They do look very similar. Obviously there’s a huge resolution difference here because the Olympus is a 20 megapixel image and the GFX is a 100 megapixel image. So you’re going to see way more detail in the GFX.

The grain structure looks way better on the GFX 100 than it does on the Olympus to me.

The GFX is at 1600 ISO to compensate for the lack of light and the exposure. The Olympus is at 200 ISO and I still think that the GFX is slightly cleaner than the Olympus. Not to mention the better detail of course because you have more resolution. That’s a whole other issue, grain structure. It looks like that the GFX 100 is a much nicer grain pattern than we’re getting on the Olympus.

So the equivalency exposure argument that we’re getting that we didn’t give the Micro Four Thirds a fair shake, it just doesn’t hold water to me in any way, shape or form. Compare it to a race car. It is like saying my go kart doesn’t go as fast as your race car. Your race car has too many cylinders. You have to dumb it down to have the same number of cylinders as my go kart. And now if you only drive in first gear, then the two are going to be equivalent as far as speed goes. But the reason you have a race car is because you have more cylinders, and you can drive it in another gear other than first gear. And that gives you a much nicer image. That’s basically it. I don’t understand it. It’s an argument built on the foundation of physics and not on practicality.

 

Now for film and video, I feel like it’s it has a better place a stronger place to be able to use. But still you still have that shallow depth of field issue. I mean, you look at the Panasonic cameras, like the GH5 or the G9. They have incredible video capabilities. And they’re light and small and the batteries go forever. So there are a lot of advantages, especially in video, for Micro Four Thirds cameras.

So there it is, equivalency, more geeky stuff. We just said that all equivalency nerds were all wrong. So enjoy that. So leave us a couple of comments at least 2 or 200. We would love to hear how you think we did or didn’t do this right.

We were very calculated on this so if you’re not happy with the way your camera performed, just flame us in the comments. Please do get the aggression out.

Make sure you’re subscribed to us on The Slanted Lens on YouTube. We really need your support here on The Slanted Lens to help us to grow. We need that support to be able to keep going.

So I hope you enjoyed this and if it does make you feel like there’s something you want to say we’d love hearing that. I want our community to be able learn about this. Leaving a comment on our YouTube channel is one of the best ways to make that happen. So give us a comment, subscribe and keep those cameras rollin’ and keep on clickin’.

Check out the Litra Lights. They even work under water!